NXP TEA1733MT GreenChip开关电源解决方案

发布时间:2011-5-23 10:17    发布者:Liming
关键词: GreenChip开关电源 , NXP , TEA1733MT
NXP 公司的TEA1733MT是 TEA1733系列GreenChip开关电源(SMPS)控制IC,适用于低成本反激拓扑,工作在固定频率模式,频率抖动降低EMI。输入电压12V-30V,起动和重起的电流非常低,只有10uA,无负载时的工作电流0.5mA,适用于75W以下的开关电源。本文介绍了TEA1733MT主要特性,方框图,典型配置图和典型应用电路图以及TEA1733典型应用电路图。

TEA1733MT:GreenChip SMPS control IC

The TEA1733MT is a low cost Switched Mode Power Supply (SMPS) controller IC intended for flyback topologies. It operates in fixed frequency mode. Frequency jitter has been implemented to reduce ElectroMagnetic Interference (EMI). Slope compensation is integrated for Continuous Conduction Mode (CCM) operation.

The TEA1733MT IC includes OverPower Protection (OPP). This enables the controller to operate under overpower situations for a limited amount of time.

Two pins, VINSENSE and PROTECT, are reserved for protection purposes. Input UnderVoltage Protection (UVP) and OverVoltage Protection (OVP), output OVP and OverTemperature Protection (OTP) can be implemented using a minimal number of external components.

At low power levels the primary peak current is set to 25 % of the maximum peak current and the switching frequency is reduced to limit switching losses. The combination of fixed frequency operation at high output power and frequency reduction at low output power provides high-efficiency over the total load range.

The TEA1733MT enables low-cost, highly efficient and reliable supplies for power requirements up to 75 W to be designed easily and with a minimum number of external components.

TEA1733MT主要特性:

SMPS controller IC enabling low-cost applications

Large input voltage range (12 V to 30 V)

Very low supply current during start-up and restart (typically 10 uA)

Low supply current during normal operation (typically 0.55 mA without load)

Overpower or high/low line compensation

Adjustable overpower time-out

Adjustable overpower restart timer

Fixed switching frequency with frequency jitter to reduce EMI

Frequency reduction with fixed minimum peak current to maintain high-efficiency at low output power levels

Slope compensation for CCM operation

Low and adjustable OverCurrent Protection (OCP) trip level

Adjustable soft start operation

Two protection inputs (e.g. for input UVP and OVP, OTP and output OVP)

IC overtemperature protection

TEA1733MT应用:

All applications requiring efficient and cost-effective power supply solutions up to
75 W.
20110504104359267.gif
图1。TEA1733MT方框图
20110504104359842.gif
图2。TEA1733MT典型配置图
201105041043591.gif
图3。TEA1733MT典型应用电路图
20110504104400359.gif
图4。TEA1733典型应用电路图
详情请见:
http://www.nxp.com/documents/data_sheet/TEA1733MT.pdf

http://www.nxp.com/documents/application_note/AN10868.pdf
本文地址:https://www.eechina.com/thread-66431-1-1.html     【打印本页】

本站部分文章为转载或网友发布,目的在于传递和分享信息,并不代表本网赞同其观点和对其真实性负责;文章版权归原作者及原出处所有,如涉及作品内容、版权和其它问题,我们将根据著作权人的要求,第一时间更正或删除。
您需要登录后才可以发表评论 登录 | 立即注册

厂商推荐

  • Microchip视频专区
  • Dev Tool Bits——使用MPLAB® Discover浏览资源
  • Dev Tool Bits——使用条件软件断点宏来节省时间和空间
  • Dev Tool Bits——使用DVRT协议查看项目中的数据
  • Dev Tool Bits——使用MPLAB® Data Visualizer进行功率监视
  • 贸泽电子(Mouser)专区

相关视频

关于我们  -  服务条款  -  使用指南  -  站点地图  -  友情链接  -  联系我们
电子工程网 © 版权所有   京ICP备16069177号 | 京公网安备11010502021702
快速回复 返回顶部 返回列表