<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>machunshui@电子工程网</title>
    <link>https://www.eechina.com/home.php?mod=space&amp;uid=2158</link>
    <description>电子工程网</description>
    <copyright>Copyright(C) 电子工程网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 08 Sep 2026 06:31:12 +0000</lastBuildDate>
    <image>
      <url>https://www.eechina.com/static/image/common/logo_88_31.gif</url>
      <title>电子工程网</title>
      <link>https://www.eechina.com/</link>
    </image>
    <item>
      <title>IAR5.5,IAR5.3转换问题</title>
      <link>https://www.eechina.com/home.php?mod=space&amp;uid=2158&amp;do=blog&amp;id=960</link>
      <description><![CDATA[用IAR5.5 for arm编译过的程序，如果改用IAR for arm 5.3编译，会造成配置丢失，重新配置以后会造成编译成功，但是不能正常运行，必须先clean以后再编译,程序才能正确运行    &nbsp;]]></description>
      <author>machunshui</author>
      <pubDate>Fri, 03 Dec 2010 08:33:15 +0000</pubDate>
    </item>
    <item>
      <title>LPC2103应用注意事项</title>
      <link>https://www.eechina.com/home.php?mod=space&amp;uid=2158&amp;do=blog&amp;id=959</link>
      <description><![CDATA[LPC2103应用注意事项：    1。电源有2组： 3.3V，1.8V    2。复位最好用外接复位芯片    3。为使能JTAG口，DBGSEL必须上拉，RTCK必须4.7k-10k下拉，注意：虽然LPC2103要求复位器件DBGSEL和RTCK都必须为高，JTAG口才能起作用，但是RTCK还是必须接4.7K-10K的弱下拉，原因是复位期间，RTCK由LPC2103内部硬件上拉，而复位以后R ...]]></description>
      <author>machunshui</author>
      <pubDate>Fri, 03 Dec 2010 08:29:52 +0000</pubDate>
    </item>
  </channel>
</rss>