x
x

上海德企招3年经验电子设计师-3年经验本科月薪均9K

发布时间:2011-10-19 17:58    发布者:lalacatherine
上海纯德企紧急招聘电子设计工程师(3年经验,本科,月薪均9K,管中餐,有班车,地铁报销)-专业德资国际化猎头,无任何向个人收费项目。


请帮忙将这个招聘信息,分享给你朋友,
欢迎推荐:上海纯德资企业,全球快100年,找工作3年,会电路原理图设计的电子设计工程师,月薪均9K,培训体系完善;管中餐交通不收钱;满一年享受10天的年假每年增一天。每个部门有名额推荐最佳潜力员工,入选到2年的培训计划,有意QQ:2506650084
Pls. send your Chinese & English Email to catherine.xie@eunacon-hr.cn,
Also you could contact Catherine:
Office phone:021-68790001-1020
; QQ : 2506650084
;Sina micro-blog ID: 开心的吴拉拉;
EunaCon HR Solutions & Services Ltd. is an Executive Search company based in Shanghai. As a member of EunaCon Consulting Group we mainly serve European clients in the Chinese market.
Our client is a German SME with about 6,000 employees worldwide and an annual group turnover of more than EUR 600 Mio. The company is specialized in developing, manufacturing and providing technical solutions for Automotive, Power Tools and Household Appliances. As one of the global market leaders in the switches and switching systems industry, our client has long-term customers such as Daimler, Audi, BMW, Bosch, Stanley Black&Decker, Hilti, and PSA.
In Shanghai our client operates a WOFE with 800 employees, including manufacturing, R&D, purchasing etc.

这家上海纯德资企业发展近100年,全球发展业务太快,96年上海这边研发中心和工厂简历后,很快扩展到850人;现在中国业务发展势头好,扩张更快;固定的是13薪,管中餐,培训完善,偶尔加班加班费另算;上海班车多,上下班到家到公司班车距离的地铁费都可以报销;培训体系完善;一去有10天年假,每一年增长一天。每个部门有名额推荐最佳潜力员工,入选到2年的培训计划~

We are exclusively assigned to seek a highly motivated candidate (based in Shanghai) for the position of:
Electronic Design Engineer 电子设计工程师(Location: Shanghai)
要点:本科,3年经验,硬件,电路图设计经历
General:
The Electronic Design Engineer position is responsible for the Electronic design of company’s Product (firmware and hardware) and report to Electronic team leader. Performance reviews and work arrangement will be determined by the electronic team leader and R&D manager. Remuneration and any changes in job level or scope will be determined by General Manager in MSC.

Scope of Work:
The electronic design engineer’s work scope will be new product development, quality improvement or product cost reduction. The relevant products include power tool switches (AC &DC), standard switches, sensors and control units.


Requirements:
-
BS (master preferred) of Electronic engineering related with min 3 years experience
-
Solid knowledge on fundamental of analog and digital circuit
-
Master of hardware design process and tools, like Altium, Pads, Oscilloscope
-
Master of embedded C language and one of PIC, ATMEL, FREESCALE, ST microcontroller
-
Good planning, organizing, analytical and communication skills
-
Proficient in English (spoken and written)
-
Good team player, result-oriented, open mind
-
Successful whole product life cycle experience in following area will be an advantage: BLDC, RF, home appliance, industrial or automotive sensor products


Responsibilities:
-
Analyze customer’s requirements and transfer them to technical solutions
-
Coordinate activities in products development from concept design until start of production including but not limited to concept presentation, phase report, documentation (hardware, software, BOM), cost calculation, prototype build and sample assembly coordination, tests coordinate, trial run support, engineering release from customer
-
Research and develop new technology according to company new product strategy
-
Support sales as main interface to the customer in all technical related issues
-
Support global project in software or hardware development
-
Support the current running products in production issue or customer complain
全国还有近百个欧美企业职位招聘中,详情请查看:http://search51job.online.tj.cn/list/co,c,2073637,0000,50,1.html



或http://www.eunacon.cn/en/hr/jobmarket.php



Pls. send your Chinese & English Email to catherine.xie@eunacon-hr.cn,
Also you could contact Catherine:
Office phone:+86 21 6879 0001 *1020
; QQ : 2506650084
;Sina micro-blog ID: 开心的吴拉拉;

本文地址:https://www.eechina.com/thread-77917-1-1.html     【打印本页】

本站部分文章为转载或网友发布,目的在于传递和分享信息,并不代表本网赞同其观点和对其真实性负责;文章版权归原作者及原出处所有,如涉及作品内容、版权和其它问题,我们将根据著作权人的要求,第一时间更正或删除。
lalacatherine 发表于 2011-10-27 11:11:13
谢谢大家围观,此岗位已招到候选人,现在同一家公司新增另一个岗位~

上海纯德企紧急招聘电子设计工程师(3年经验,本科,月薪均9K,优秀者薪水可议,管中餐,有班车,地铁报销)-专业德资国际化猎头,无任何向个人收费项目。

请帮忙将这个招聘信息,分享给你朋友, 欢迎推荐:上海纯德资企业,全球快100年,找工作3年,懂PLC或LABVIEW,有设备搭建经验的工程师,月薪均9K,优秀者薪水可议,培训体系完善;管中餐交通不收钱;满一年享受10天的年假每年增一天。每个部门有名额推荐最佳潜力员工,入选到2年的培训计划,有意QQ:2506650084)

Pls. send your Chinese & English Email to catherine.xie@eunacon-hr.cn,
Also you could contact Catherine:
Office phone:021-68790001-1020 ; QQ : 2506650084 ;Sina micro-blog ID: 开心的吴拉拉;

EunaCon HR Solutions & Services Ltd. is an Executive Search company based in Shanghai. As a member of EunaCon Consulting Group we mainly serve European clients in the Chinese market.

Our client is a German SME with about 6,000 employees worldwide and an annual group turnover of more than EUR 600 Mio. The company is specialized in developing, manufacturing and providing technical solutions for Automotive, Power Tools and Household Appliances. As one of the global market leaders in the switches and switching systems industry, our client has long-term customers such as Daimler, Audi, BMW, Bosch, Stanley Black&Decker, Hilti, and PSA.
In Shanghai our client operates a WOFE with 800 employees, including manufacturing, R&D, purchasing etc.

这家上海纯德资企业发展近100年,全球发展业务太快,96年上海这边研发中心和工厂简历后,很快扩展到850人;现在中国业务发展势头好,扩张更快;固定的是13薪,管中餐,培训完善,偶尔加班加班费另算;上海班车多,上下班到家到公司班车距离的地铁费都可以报销;培训体系完善;一去有10天年假,每一年增长一天。每个部门有名额推荐最佳潜力员工,入选到2年的培训计划~

We are exclusively assigned to seek a highly motivated candidate (based in Shanghai) for the position of:

Tester Engineer (Non Automotive)  Scope of Work: 要点: 懂PLC或LabView,会搭用于产品测试的终端设备,英文要求一般,             两年以上经验;  英文要求,不用担心:主要还是工作经历,英文要求不高,但最起码会英文自我介绍,和对四级左右的小短文能阅读和翻译; 有些技术文案是英文的要能看懂,英语口语能日常用语基本交流即可。   中英文简历发我撒catherine.xie@eunacon-hr.cn    Minimum Requirements: - Fundamental technical knowledge based on at least a bachelor university degree - Has min. 3 years work experience in the measurement and test engineering field  - Able to program PLC - Knowledge about LabView - Able to design gauges and fixtures capable for mass production process - Able to read and fully understand technical drawings and specifications - Have the ability to communicate with others - Proficient in English (spoken and written) (ability to understand technical documents written in English and ability to discuss written or oral about technical problems in English) - Ability to motivate and lead staff; Good sense of team- work - Ability to work on Windows XP based Computers and the MS-Office Package - Good knowledge about Industrial Communication Networks (e.g. ProfiBus, CAN-Bus, Ethernet, RS232, etc.) - Good knowledge about Electrical and Electronic Circuit Diagrams - Good knowledge about Measurement and Test Engineering - Fundamental knowledge about programming in a higher programming language (e.g. C/C++, Basic, Java, etc.) - Fundamental knowledge about Motion Control Systems - Fundamental knowledge about Electrical Drives - Fundamental knowledge about Power Electronics - Good sense of structure working - Very good capability of mistake / failure finding and problem solving  Position Responsibilities: - Responsible for the specification, development, design and build of current and new End of Line Tester (EOL-tester) suitable to our products in the SSC and Automotive area acc. to company standard - Responsible for the improvement and debugging of our current End of line testers acc. to company standard - Having the project lead for new testers and improvement for current testers - Coordinate, plan and control project team member work - Responsible for Lab tester for QA - Responsible for Maintenance plan for EOL tester and automatic assembly equipment - Support production for trouble shouting for equipment - Coordinate and define spare parts for EOL tester and automatic assembly equipment (electric) - Search and define suitable components for our EOL testers - Work together with our EOL teams in Germany, to find and create the right global standards for EOL equipment. - Creating all needed documentation for our EOL test equipment. - Training of new and current team members - Cost saving activities on current EOL testers and Automatic assembly equipment   
全国还有近百个欧美企业职位招聘中,详情请查看:http://search51job.online.tj.cn/list/co,c,2073637,0000,50,1.html 或http://www.eunacon.cn/en/hr/jobmarket.php                                                                                          
Pls. send your Chinese & English Email to catherine.xie@eunacon-hr.cn,
Also you could contact Catherine:
Office phone:+86 21 6879 0001 *1020 ; QQ : 2506650084 ;Sina micro-blog ID: 开心的吴拉拉;
lalacatherine 发表于 2011-11-8 12:19:10
猎头:找非标设备搭建经验的工程师

求助下大家,找个有非标设备搭建经验的2-3年工程师,人才好像不多呀? 为上海德企招的,也就2-3年要求的经验,懂PLC或者Labview其一就行,月薪平均下来1W,培训体系完善;管中餐,交通不收钱;享受10天的年假,每个部门有名额推荐最佳潜力员工,入选到MBA等培训计划,有意请QQ:2506650084,谢谢~
您需要登录后才可以发表评论 登录 | 立即注册

厂商推荐

  • Microchip视频专区
  • EtherCAT®和Microchip LAN925x从站控制器介绍培训教程
  • MPLAB®模拟设计器——在线电源解决方案,加速设计
  • 让您的模拟设计灵感,化为触手可及的现实
  • 深度体验Microchip自动辅助驾驶应用方案——2025巡展开启报名!
  • 贸泽电子(Mouser)专区
关于我们  -  服务条款  -  使用指南  -  站点地图  -  友情链接  -  联系我们
电子工程网 © 版权所有   京ICP备16069177号 | 京公网安备11010502021702
快速回复 返回顶部 返回列表